日韩一级一级,天天操肏,成人在线偷拍视频,国产一级片免费在线观看,日韩人妻中文字幕,操逼传媒,大香蕉鸥\美一区二区,欧美怡红院视频一区二区三区

LC-R 720 空間光調制器 (反射)

LC-R720空間光調制器是基于一個反射LCOS微型顯示器用的1280×768像素（WXGA）的分辨率。為20μm的像素間距和92％的填充因子在LC-R720表示的70％左右在可見光的反射率。對<3毫秒和180赫茲的高圖像幀速率非?？斓捻憫?yīng)時間，使LC-R720空間光調制器用于高速應用，例如面板顏色順序投影一個不錯的選擇。除了投影應用在LC-R720也可以被用于相位調制。該裝置提供約1Pi在可見光的相移。例如（~1.2Pi@532nm）

產品名稱： LC-R 720 空間光調制器 (反射)

合作廠商： HOLOEYE

產品型號： LC-R720

詳細信息

產品名稱：LC-R 720 空間光調制器(反射)

產品簡介：

LC-R 720 空間光調制器 – Microdisplay Features
Display Type:	Reflective LCOS (Twisted Nematic)
Resolution:	1280 x 768
Pixel Pitch:	20 µm
Fill Factor:	92 %
Active Area	25.6 x 15.4 mm (1.18″ Diagonal)
Addressing	8 Bit
Signal Formats	DVI – WXGA Resolution
Frame Rate	180 Hz

The LC-R 720 Spatial Light Modulator is based on a reflective LCOS microdisplay with a resolution of 1280×768 pixel (WXGA). With a pixel pitch of 20µm and a fill factor of 92% the LC-R 720 shows a reflectivity of around 70% in the visible. The very fast response time of < 3ms and the high image frame rate of 180 Hz makes the LC-R 720 Spatial Light Modulator a good choice for high speed applications such as one panel color sequential projection. Besides projection applications the LC-R 720 can also be used for phase modulation. The device provides a phase shift around 1 Pi in the visible (e.g. ~1.2Pi @ 532 nm).

Download PDF: Brochure Spatial Light Modulators

Special Optical Features:
- Reflective (TN) LCOS Microdisplay (180 Hz)	- Amplitude or Phase Modulation
- Above 1 π Phase Shift in the Visible	- Intensity Ratio of 1000:1 Typical
- Fast Response Time < 3 ms	- Trigger Sync
- High Frame Rate (180 Hz) for Color Sequential Operation	- High Light Efficiency / High Fill Factor

The LC-R 720 is delivered as complete developer kit and plug-and-play device. The display settings can be controlled by an user-friendly graphical user interface (GUI) software.

LC-R 720 Spatial Light Modulator Kit – Contents:

LC-R 720 Spatial Light Modulator – Scope of Supply

LC-R 720 SLM Driver Box

LCOS Imager (1280 x 768 Pixel)

DVI (Digital Video Interface) Cable

Serial Port Cable (RS232)

Power Supply (24V DC, 36VA)

Operating Instruction / Manual

Data Medium (CD or USB Flash Drive) with Manual, User Software and Application Software

LC-R 720 Spatial Light Modulator – Software Features:

The LC-R 720 spatial light modulator can simply be addressed like an external monitor using the standard DVI interface of the graphics card. No additional software or dedicated hardware is needed to operate the SLM.

The LC-R 720 SLM is delivered with a GUI (Graphical User Interface) based calibration software. The calibration software can be used to change geometrical settings, brightness, contrast and the electrooptical response by applying a new gamma curve. For these advanced callibrations the RS232 interface has to be connected via a servial COM port of the computer (there are also USB to COM adapters available).

In addition a HOLOEYE SLM Application Software is provided with the device. Key features of which are:

Computation of computer generated holograms (CGH) from user defined images

generation of SLM signals representing basic optical functions such as lenses, gratings, axicon and vortex functions

superposition of CGH’s with basic optical functions to combine functionalities

LC-R 720 Software Features
SLM Callibration Software	Brightness / Contrast / Geometry / Gamma Control
SLM Application Software	Basic DOE computations; Generation of optical functions (Circular Aperture, Fresnel Zone Lens, Axicon, Single and Double Slit …); Gratings (incl. Blazed and Sinusoidal)